Track pin dismantling machine introduction
YL120-200 crawler pin disassembly machine, using hydraulic energy into mechanical energy principle, crawler excavator crawler pin disassembly tool.With our products SYB-2B-S large flow manual reversing pump (suitable for field work), electric pump (220V, 380V) as the power source to make the hydraulic cylinder move forward quickly, so as to smoothly remove the pin shaft. Instead of gas cutting, manual hammering.Keep track intact. Crawler excavator maintenance, assembly tools. When first used, the oil tank must be filled with 46# hydraulic oil before testing the machine.
Track pin dismantling machine is a multi-functional construction machinery maintenance equipment. The chain press produced by our company is suitable for all kinds of track construction machinery and equipment chain disassembly and disassembly of all kinds of shaft sleeve.It is an indispensable equipment for construction machinery maintenance enterprises. The portable chain dismantling machine adopts bi-directional hydraulic device, and the chain pressing machine reduces the oil circuit and is easy to maintain. It is not only suitable for use in the factory, but also can be used at the site and in the field anytime and anywhere. Easy to use, smart operation, the model is divided into electric and manual two, the user can choose according to their actual situation.
| Syb-2s -B manual reversing pump with large displacement |
| Maximum hand force of manual reversing pump |
50Kg |
| Working pressure |
high pressure 0-63mpa, low pressure 4Mpa |
| Working flow |
high pressure flow 7ml/ time low pressure flow 50ml/ time |
| Tank capacity (L) |
13L |
| Medium |
46# hydraulic oil |
| DBS1.2 electric pump |
| Motor power |
1.5kw 220V or 380V |
| Working pressure |
0-63mpa |
| Working flow |
1.2l /min |
| Tank capacity (L) |
16L |
| Medium |
46# hydraulic oil |
| Hydraulic cylinder thrust |
120T, 160T |
| Stroke |
200 mm |
Track pin dismantling machine precautions
1, the pressure machine to correctly install and operate the three lead screws must ensure that the level and adjustment length is consistent
2, the machine is not allowed to correct the mold in operation
3, the hydraulic oil is No. N46 anti-wear hydraulic oil or No. N46 low condensate hydraulic oil, used after 80 ~ 100 mesh mesh filtration, the first oil change time is not more than two months, after every six months oil change
4, the machine should check the cleanliness of the oil after 200 hours of work, requiring no odor, drop a drop of oil on the white filter paper, there is no ink spot in the center of the oil, otherwise the oil should be changed
5, the press shall not be overloaded; Unbiased load
6. If the system is accidentally leaked, sufficient hydraulic oil should be added after eliminating the fault to ensure that the oil level is above 80%
7, often check the pump station, oil tank cleaning, strictly prohibit water, dust, foreign matter into the tank
8, such as the conversion function, the air in the system should be drained before it can work
9, in the test and work, if there is an anomaly should be stopped immediately for inspection
10. Keep the pressure for 10 minutes and allow pressure reduction of 2.5Mpa
11, when the hydraulic system hits the high pressure, it is strictly prohibited to knock the parts, so as to avoid the danger of bursting or parts popping out
12, the hydraulic pump station in the process of strengthening the pressure, to pay close attention to the pressure gauge digital changes, especially when the piston stroke is about to be in place, the maximum high pressure display of 60MPA if it is in place, immediately hit the reversing valve to the middle or other outside a port, do not let the tubing, the cylinder in a high pressure state for a long time. Otherwise, the service life of the product will be shortened
13, in the removal of the pin must pay attention to the surrounding environment, otherwise the removal of the pin may be shot wounding
14, in the process of pressurization, it is found that the direction of the pin out is offset, should immediately stop pressurizing, adjust the location distance of the bolts on the fixing rod of the disassembly seat. Wait for the balance before continuing pressure, in case the pin bullet flies
Shandong Yului company profile
Shandong Yurui Economic & Trade Co., Ltd. was established in 2023 with a registered capital of 3 million yuan. The company is located in the National High-tech Zone of Jining City, Shandong Province, near the Jiwei Expressway, superior position, convenient transportation. The main business of Yurui Economic and trade includes construction machinery and parts, agricultural machinery, mining machinery, environmental protection special equipment and parts sales. The company has an independent right to import and export goods, goods can be sold all over the world. The company has a number of professional technical engineers, maintenance experts, sales and service personnel, skilled and experienced, can provide product consulting, technical consulting, maintenance consulting, sales consulting and transportation services. In order to better serve customers, the company has established a perfect marketing and sales channels and professional after-sales service system, from front-end sales to halfway transportation and then to the back-end service full coverage, can realize the seamless connection of products from the factory to the customer, you only need an order, the rest of the thing I do. The company's service philosophy is "do service with heart, win the world with integrity", welcome friends from all walks of life to visit, guide and negotiate.
FAQ
Are you manufacture?
Yes. We are one of leading manufacturers
Do you have stock productions to sell?
Yes,of course.But we also offer OEM service. Please send us some drawing.
What information do you want to know if i want to get a quotation?
a). The model/size of your products.
b). The application for your products.
c). Special package methods if you needs.
d). Raw material.
Do you inspect the finished products?
Yes.Each step of products will be carried out inspection by QC department until shipping
What advantages do you have?
(1) Punctual: Have your orders met with the latest delivery?
We are a manufacturer with so many advanced and new machines. It ensures we have the ability to carry out the production time for punctual delivery.
(2) 20year production experience. We have over 20 years experience in this industry.
That means we can preview the problems for the orders and production. Therefore, it will make sure to deduce the risk of bad situation to happen.
(3) Point to point service.
There is two sales departments who will serve you from inquiry to products shipped out. During the process, you just need to discuss with him for all the problems and the way sames much times.
The picture of the machine is for reference only. The actual machine is subject to customer order.
){kind=link}
){kind=link}