The new type of horizontal drilling machine is suitable for the construction of pipeline crossing drilling machines, and is divided into two categories: hydraulic and electric. The renovation of tap water in rural areas and the construction of new rural areas is a major project. 380V water drill pipe jacking machine, 220V water drill pipe jacking machine, two box electric water drill pipe jacking machine, three box electric water drill HBXJS-50/4 water drill pipe jacking machine. Water drill pipe jacking machine is a new type of crossing tool with the characteristics of simple operation and small volume, and is deeply loved by municipal small-scale crossing projects and other non excavation projects in tap water engineering. The water drill pipe jacking machine has been improved from the previous bulky oil cylinder pipe jacking to the current water injection drilling pipe, with simple operation, reasonable design, and convenient application suitable for small pipe jacking, such as water companies, water conservancy construction, communication pipelines, and road crossings. The water drill pipe jacking machine is equipped with alloy drill bits, so it has the characteristics of small size, light weight, high work efficiency, and simple and easy operation. The water drill pipe jacking machine uses a universal joint for the return of the pipe during the process of returning the pipe. During the rotation of the return, the pipe can be smoothly pulled back in a static process. In addition, the mechanical development and production process takes into account the soil conditions inside the pipe. A spiral excavation device is used at the front of the connection between the universal joint and the pipe during the return, which can use a rotary excavator to pull out the remaining soil during drilling at the same time as the pipe. The water drill pipe jacking machine adopts an automatic travel design and automatic return function during operation. The main engine is connected to the gearbox as a whole. Our factory's after-sales service can provide professional guidance with technical personnel on site. Small pipe jacking machines, water drill pipe jacking machines, and hydraulic special underground pipe jacking machines are essential for your non excavation projects.
| rated power |
3KW/4KW |
| host weight |
50KG |
| rated voltage |
380/220V |
| rated speed |
690rpm / 800rpm |
| drilling speed |
2800 mm/min |
| borehole diameter |
600 mm |
Rhinestone pipe jacking machine, hydraulic pipe jacking machine is a kind of equipment for laying underground pipelines, which is characterized by the fact that it can do crossing work below the surface of 1.2 meters to 3.5 meters, and is the equipment for the implementation of electric power telecommunications, natural gas pipelines, cable pipelines and other projects. Rhinestone pipe jacking machine, also known as tap water pipe jacking machine, is characterized by small and flexible, which changes the working efficiency of hydraulic pipe jacking machine. Rhinestone pipe jacking machine is a new type of trenchless equipment, in the original bulky cylinder pipe jacking is improved into the current water injection drill pipe, simple operation, reasonable design, convenient application is suitable for small pipe jacking, such as water supply companies, water conservancy construction, communication pipelines, crossing highways, etc. The cement pipe jacking machine is equipped with an alloy drill bit, so the rhinestone pipe jacking machine has the characteristics of small size, light weight, high work efficiency, simple and easy operation. This set of drilling rigs is equipped with an independent slurry system, a complete set of drilling tools and drill pipes
Underground pipeline drilling machine operation manual
1. Before use, check whether the drilling line is properly connected, whether there is leakage or cable scratch, whether the water pipe is firmly connected, and whether there is loosening phenomenon.
2. No water reaming is allowed. The method of water supply before drilling, stop drilling before shutting down must be done.
3. Construction plus Φ 42 bit first, open the start switch, manual or automatic way into drill pipe at the same time open the switch, water injection pipe after completely into the water before they stop and open the caliper stuck drill pipe start switch back the host at the same time, the connection of drill pipe, is launching way will drill pipe joint prison again into, so cycle operation.
4. When drilling a backexpanding hole, adjust the backexpanding speed according to the soil quality and pore size.
5. In order to facilitate the construction, the machine is equipped with positive and negative start switches to solve the problem of slow manual operation when changing the rod.
6. In general, the amount of water injection is larger than that of normal straight drilling when dragging back and reaming. Properly adjusting the pump flow can reduce the amount of silt in the pipeline memory.
Points for attention:
1. Personnel using this machine must wear insulated shoes and be familiar with the performance of this machine. Structure. Methods of operation and general safety considerations.
2. Before using the machine, leakage protection device must be installed at the wire inlet of the motor.
3. Before using the cable, check whether it is scratched or damaged.
4. Before using the machine, check whether the screws of each part are loose. If they are loose, they must be tightened before use.
5. Dry drilling is strictly prohibited. The method of water supply first, drilling, drilling stop first, and then shutdown is strictly implemented.
6. The drill bit must be sharp before use.
7. When connecting and changing the drill pipe, the connection must be jammed with the fixed caliper before changing the rod.
8. When changing the rod, carefully observe the work changes (only the reverse rod), and confirm that the drill pipe is not loose, slip and fall off.
9. The use is prohibited under the following circumstances:
A: numbness caused by leakage
B: abnormal sound in the main engine, such as knocking sound
C: Abnormal sound of motor operation, such as screaming, etc
FAQ
Q: Are you a manufacturer of the Underground pipeline drilling rig?
A: Yes, we are. our company has passed ISO and CE certification, products have been exported to more than 20 countries and regions.
Q: How is your after-sales service of the Underground pipeline drilling rig?
A: We offer a one-year warranty for the entire machine and a 6-month warranty for electrical components,We have a number of after-sales services that provide 24-hour technical support via phone and e-mail.
Q: What is your lead time of Chinese Underground pipeline drilling rig?
A: It takes 7-10 days for normal goods and 15-25 for customization.
Q: What is your payment term of the Underground pipeline drilling rig?
A: T/T, L/C.
Q: Is it convenient to visit your factory and Underground pipeline drilling rig? How can I get there?
A: Welcome you to visit our company. We will pick you up when you arrive.
If you can't find what you're looking for, please contact us and place a custom order. We can produce according to your sample or drawing.
){kind=link}